AMF-BRUNS LINEARLIFT AL1, Руководство по эксплуатации

Страница: 35 / 72

Maintenance and Repair
Linear Lift AL1 Page 35 of 72
7.2 Routine Maintenance Work
The maintenance schedule below lists the maintenance work that
must be carried out at regular intervals.
Contact the customer service department for maintenance work
that must be carried out by a specialist (see Chapter 15, page 70).
7.2.1 Service life of components
The service life of the hydraulic hoses is four years.
Maintenance-free components are designed to have the same ser-
vice life as the entire service life of the linear lift.
7.2.2 Maintenance schedule
Interval Activity see
Daily Functional test of the safety devices. Section 7.3, page 36
Carry out a visual inspection for damage or faults. Initiate re-
pairs if necessary.
Inspect the wearing plates on the underside of the platform
for wear. Replace the wearing plates if necessary.
Listen for any unusual noises and look for signs of juddering
when operating the linear lift. Initiate repairs if necessary.
weekly Inspect the contact points of the torsion springs 100° on the
shaft of the platform for wear and sufficient lubrication
(grease). Apply grease if necessary.
yearly Inspect the hydraulic hoses. Section 7.4, page 36
Check that all fastenings are secure.
Have the linear lift inspected by a technical expert. Section 7.5, page 36
Every four
years
Renew the hydraulic hoses.
as required Clean the linear lift.
7.2.3 Maintenance record
Enter maintenance and repair work that has been carried out into
the maintenance record provided for this purpose (see Section 7.6,
page 37). This provides a traceable record of maintenance work.
For records of maintenance work over and above this, it is recom-
mended that you keep your own lists.