Ametek Thermox WDG-VRM, Руководство пользователя

Страница: 78 / 104

7-4 | Thermox WDG-V
RM
control Diagnostics: Relays screen
Figure 7-1b. Diagnostic Mode. Relays screen.
This screen displays the Set Values and Actual Values for the five Outputs
and allows the user to Open or Close the output relay.
4. Use the right navigation arrow to move to the Close Contact screen.
control Diagnostics: close contact screen
Figure 7-1c. Diagnostic Mode. close contact screen.
This screen reflects the status of the contact input on the sensor board inter-
face. The user provides the physical connection to the appropriate terminal
block (Contact In) that allows them to access the switch electronically (open/
close) to trigger a calibration. When Diagnostic Mode is ON, the close con-
tact switch is open, preventing the analyzer from accidentally triggering an
auto calibration.
5. When you press the CANCEL key to exit this menu, a message displays
indicating that you are exiting Diagnostics Mode.