© 2021 AMETEK Power Quality Solutions | Technical Support 800-645-9721 | surgex.com
11
User Manual
5.4.1.2 Outlet Configuration
The Outlet Configuration tab allows for the specification of unique names and
reboot times per outlet. The configuration for initial state per outlet is also here, if
this option is selected in the Device Configuration tab for either On Power Up or
On Shutdown Clear.
Outlet Configuration
Item
Description
Outlet Description
A fixed short phrase that references a physical feature.
Outlet Name
Specifies the name label to be associated with this Outlet
Reboot Time
Number of seconds that the device will wait in between turning an outlet off, and turning the outlet
back on during a reboot command.
Initial State
The state that an outlet will assume during start up or after a shutdown clears, if the initial state
setting is selected in the Device Configuration tab. Options are as follows:
Always On
Regardless of other settings, this outlet will always be on. Ignores Shutdown
state and deselecting Initial State in the Device Configuration tab. Outlet ignores
user commands to reboot or power off. The only thing that will kill power with this
selected is a hard reboot, or power outage.
Always Off
The opposite of Always On, this setting will never allow an outlet to pass power.
On
The outlet will start in an On state.
Off
The outlet will start in an Off state.
Last
The outlet will assume the last state it was in. (Factory Default)
Reboot Only The outlet will act similar to the On state, but will ignore user commands to power
off. This outlet will only respond to reboot commands. Useful for network
appliances that may need to be rebooted, but otherwise want to be on all the
time. Using this setting, the outlet will still turn off during Shutdown state.
