Ametek Reichert 7CR, Руководство пользователя

Страница: 15 / 48

16060-101 Rev. M 15
Instrument Setup
(
continued)
General Settings
The following options are available in the General Setup menu:
Parameters Settings
LANGUAGE Sets the language that appears on the Operator Display.
TONE Sets the audible tone indicator (“beep”) to be silent (OFF) or audible (ON).
Note: Any time a selection is made on the touch screen, a beep will sound if the
option is set to “ON”.
SLEEP Sets the duration of time (5, 10, 15, 20 or Off) that the instrument is inactive before
it enters the “sleep” mode (the Operator Display goes blank when the “sleep”
mode is active). To illuminate (“wake”) the Operator Display after the “Sleep”
mode is active, touch the screen.
Note:
When unit comes out of sleep mode, any measurements that were not
cleared prior to the activation of the sleep mode will still appear, but the
measurement buttons will be disabled in order to prevent accidentally
combining data from two different patients. Any previous measurements
must be output or cleared before taking new readings.
BRIGHTNESS Adjusts the brightness of the Operator Display by touching the desired level.
EYE TITLE Displays the eyes as either Right/Left or OD/OS.