Ametek Jofra ASC-400 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 69

Ametek Jofra ASC-400 Скачать руководство пользователя страница 22

128797 05

2017-08-11

21

5.4

Measuring Temperature

5.4.1 Using Thermocouples (TC)

The ASC-400 supports the following thermocouple types:

B, BP, C, E, J, K, L, N, R, S, T, U, XK

The characteristics of all the types are described in section 11 – Technical
Specifications.

The ASC-400 has 3 cold junction Modes to choose from:



CJ Auto

Automatic CJ compensation, CJ temperature inside the

connector is measured by a high accuracy RTD.



CJ Off

With CJ in OFF Mode, the calibrator will measure the difference

between the thermocouple at the junction and at its TC input

terminal (equivalent to 0ºC CJ).



CJ Manual

With CJ in Manual Mode it is possible to set the desired CJ

temperature to be used for temperature calculation.

Note…

CJ Off Mode should only be used when calibration is being done using an
external ice bath.
CJ Manual mode should be used when the cold junction temperature is known,
but different from 0 ºC.

To use the thermocouple to measure temperature, follow the principle of navigating
through the functions described in the guidelines in section 4.2 and proceed as follows

:

1. Attach the thermocouple leads to the TC mini plug, and insert the plug into the

input/output of the ASC-400 calibrator, as shown in Figure 4.

2.  Enter edit mode.
3.  Select “Thermocouple” from the Lower Mode list.
4.  Select the desired Test Mode (In) from the Test Mode list.
5.  Select TC function from the TC Type list.
6.  Select CJ Mode from the list.
7.  If CJ Manual is selected a CJ temperature value must be entered using either the

ARROW keys or the numeric keys.

8. Select the temperature unit from the Units list.

«
...
20
21
22
23
24
...
»

Содержание Jofra ASC-400






































































Отзывы:

Нет отзывов