Ametek DTI 1000, Справочное руководство

Страница: 34 / 46

124745 04 2017-08-10 33
PC hardware requirements
•
IBM compatible PC with 486 or higher processor (Pentium
TM
200
MHz recommended).
•
32 MB of RAM (64 MB recommended).
•
4 MB available hard-disk space.
•
Standard VGA monitor (800 x 600, 256 colours), (1024 x 768
recommended).
•
CD-ROM drive.
•
One vacant RS 232 Serial Port.
PC software requirements
•
Microsoft Windows
®
98, Microsoft Windows
®
NT 4.0, Microsoft
Windows
®
2000, Microsoft Windows
®
ME, Microsoft Windows
®
XP.
•
System font: MS Sans Serif and Arial.
8.2 Installing the AmeTrim-ATC/DTI Software
The software comes on a CD-ROM and is ready to run – no
installation is required. Simply insert the CD-ROM and run the
ATC/DTI-adjustment program.
8.2.1 Connecting the PC and the ATC/DTI
Caution…
1. Ensure that both the PC and the ATC/DTI are switched
off at the mains. Failure to do so may result in your
equipment being damaged.
2. Connect the serial cable provided to the “RS 232” port on
the back of the DTI and to the COM port on the PC.
3. Switch on the PC and the DTI.