Ametek DTI 1000, Справочное руководство

Страница: 18 / 46

124745 04 2017-08-10 17
5.2.1 Power supply
The DTI is supplied with 8 1.5 Volt batteries as standard. When the
battery voltage is low following message will appear:
BATTERY LOW
PRESS ANY KEY
This message will only appear one time after the DTI has been
switched on, and is removed by pressing the key <Menu/Enter> or
<Reset/Select>. The DTI is still able perform accurate measurements
a little while longer.
The batteries are placed in the two battery holders shown in the
figure below:
It is also possible to supply the DTI from a mains adapter at the
connector shown in the figure above. The mains adapter can be
supplied by AMETEK.
RS 232
9VDC
-
200 mA
2 x 4 PCS BATTERIES TYPE AA
Mains adapter