Ametek CHANDLER ENGINEERING Twin UCA 4262, Руководство по эксплуатации

Страница: 19 / 40

SECTION 2 – OPERATING INSTRUCTIONS 2-9
4. Unscrew and remove the bottom plug of the test cell.
5. Turn the cell over and tap the cement sample out of the test cell with a drift bar and a
hammer.
6. Clean the cement and grease from the top and bottom plugs and cylinder with soap and
water, or an appropriate solvent.
7. When all traces of cement have been removed, replace the O-rings. Grease the inner
surfaces of the test cell, including the seal, O-rings, and threads with a liberal coating.
The unit is now ready to run another test.