AmeriWater CHIE VARIABLE SPEED BOOSTER PUMP SYSTEM, Руководство по эксплуатации и техническому обслуживанию

Страница: 7 / 14

5
START-UP
Warning : At high temperatures, the pump may be extremely hot. Do not
touch it.
Priming:
Before startup, or if the pump has been drained, the pump must be filled with
liquid and vented.
Proceed as follows:

Close the discharge isolating valve and bypass valve.
(See System Design drawing)

Remove the priming plug in the pump sleeve. (See Plug drawing).
Slowly open the suction valve (See System Design drawing), in the inlet
pipe until a steady stream of liquid runs out of the priming port.
Warning : The escaping liquid may be very hot. Therefore, care must be
taken to ensure that the liquid does not cause personal injury or
damage to other components
.

Replace priming plug and tighten securely.

Start the pump and slowly open the discharge valve until it is fully open.

Completely open the suction valve in the inlet pipe.
Plug Drawing