9
© American Time
Wireless Digital Clocks Owner's Manual
D
e
scr
ip
tio
n
In
st
a
lla
tion
O
p
e
rat
io
n
Co
d
e
B
lue
M
ai
n
te
n
a
n
ce
A
pp
e
n
d
ix
S
pe
c
ific
at
io
n
s
© American Time
In
st
a
lla
tion
Wireless Digital Clocks Owner's Manual
Timer Control Station (Optional) Operation
Up Counter Elapsed Time Operation
Once the desired preset value has been set, the unit is now ready to function as an UP count elapsed timer.
Be sure the
SET/RUN
switch is in the
RUN
position.
Set the
UP/DOWN/CLOC
K switch to the
UP
position.
Press
RESET
to display
00:00:00
.
Press the
START/STOP
switch to begin counting elapsed time.
Press the
START/STOP
switch again to stop and hold the count.
Press the
START/STOP
switch again to resume elapsed time counting.
To start over press
RESET
to display
00:00:00
again.
When the timer reaches the preset value, it will sound the audible alarm for 2 seconds and hold the time count.
During an UP count elapsed time operation, you can display any of the other time functions using the UP/DOWN/
CLOCK switch as desired.
Setting the Down Counter Preset Time
If you are using the clock as a DOWN counting elapsed timer, you will need to set a preset time to count DOWN from.
In this mode, the alarm and hold will occur at 00:00:00.
Set the
UP/DOWN/CLOCK
switch to the
DOWN
position.
Set the
SET/RUN
switch to the
SET
position. The hours digits will be flashing.
Using the
INCREMENT
switch, set the desired hours for the preset time, then press
ENTER
. The minutes digits
will now be flashing.
Using the
INCREMENT
switch, set the desired minutes for the preset time, then press
ENTER
. The seconds
digits will then be flashing.
Using the
INCREMENT
switch, set the desired seconds for the preset time, then press
ENTER
. The display will
then flash
donE
.
Set the
SET/RUN
switch back to the
RUN
position.
Down Counter Elapsed Time Operation
Once the desired preset value has been set, the unit is now ready to function as a DOWN count elapsed timer.
Set the
UP/DOWN/CLOCK
switch to the
DOWN
position.
Be sure the
SET/RUN
switch is in the
RUN
position.
Press
RESET
to display the preset value which was set previously.
Press the
START/STOP
switch to begin counting down elapsed time.
Press the
START/STOP
switch again to stop and hold the count.
Press the
START/STOP
switch again to resume elapsed time counting.
To start over press
RESET
to display the preset value again.
When the timer reaches 00:00:00, the timer will stop counting and the audible alarm will sound for 2 seconds.
During a DOWN count elapsed time operation, you can display any of the other time functions using the UP/DOWN/
CLOCK switch as desired
