3-5
d. MOUNTING THE ATN NVM-14 TO A SCOpE OR
TELESCOpE
the nVM-14 may be mounted to a variety of daytime scopes/
telescopes utilizing the Flip-up Scope Adapter Mount.
1. loosen the adapter fixing screws (a).
2. put the insert into the adapter (atn supplies inserts of diffe-
rent sizes for their coupling with 38 mm to 43 mm eyepieces).
3. Now attach the monocular to the bracket (B). You can push
the monocular rail into the bracket guide (C) and then take it off
the bracket only when you loosen the fixation knob (D) holding
the button (2) pressed at a time. With the fixation knob (D) tight-
ened you secure the monocular on the bracket.
4. push a daytime riflescope or telescope eyepiece into the
adapter attached to the monocular, making sure a small space is
left between the scope eyepiece and the monocular front lens.
5. tighten the adapter screw (a) securely.
6. By pressing button (F) on the adapter you can raise the
monocular 180 degrees upward in order to work with the day-
time scope only.
Figure 3-4
Mounting the ATN NVM-14 to a scope
B
A
C
d
E
F
Содержание ATN NVM14
