American Technologies Network ATN NVM14, Руководство оператора

Страница: 31 / 60

3-9
2. align the adapter and the head/helmet mount. Slide the monocular
rearwards until the alignment boss (Figure 3-10, A) aligns with
the alignment groove (B) on the head/helmet mount. push until
the monocular locks into the head/helmet mount.
3. With this adapter you may see through the eyepiece using
either right or left eye. to change the viewing eye, loosen the nut
(Figure 3-9, E) and rotate the socket (D) 180 degrees. Tighten
the nut (e) anew.
Figure 3-10
Attaching ATN NVM-14 to Mil-Spec Headmount
4. Dual Bridge adapter for Mil-Spec headmount allows using the
nVM14 as a pair of dual tube goggles with Mil-Spec headmount,
MICH or paGSt helmet mount.
Figure 3-11
pair of ATN NVM-14 with dual Bridge Adapter
on the Mil-Spec Headmount
J. MOUNTING 3x, 5x OR 8x LENS TO THE ATN NVM-14
The 3x lens is an afocal lens and screws into the existing lens.
A B