6-3
ITEM
NO.
LOCATION ITEM
TO CHECK/
SERVICE
pROCEdURE
NOT FUNCTION-
ING AT OpTIMAL
LEVEL IF
4
Battery adapter
/ Compartment
Check to make sure battery
adapter is present. remove
battery adapter and inspect
for corrosion, moisture, cor-
roded or defective contacts,
and that o-ring is present.
adapter is mis-
sing, contacts
damaged or cor-
roded, or o-ring
is missing.
5
Diopter adjust-
ment ring
rotate diopter adjust-
ment ring to make sure the
eyepiece is not too tight or
too loose.
Binding, not
moving freely or
too loose.
6
eyecup
Inspect for dirt, dust, and
cracked or torn cup. Inspect
for bent, broken or improperly
fitting eyecup. If necessary,
clean with water.
7
objective lens
Focus Ring
rotate objective lens focus
ring to ensure free move-
ment.
Binding or not
moving freely.
8
lens Cap
Inspect for cracked, torn, or
missing lens cap.
9
Viewed Image
refer to Section V – opera-
tion Defects – to inspect for
operational defects.
Flickering,
flashing, edge
glow, or shading
is observed.
10
Strap, pads
Inspect for cuts, tears, fraying,
holes, cracks, or defective
fasteners.
Damage causes
straps or pads
to be unservice-
able.
Содержание ATN NVM14
