SINGLE CONTROL KITCHEN
FAUCET WITH CAST SPOUT
Installation
Instructions
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Certified to comply with ANSI A112.18.1M
4241
4243
1
3
4
5
6
7
A
B
8
CAUTION
1
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
Turn off hot and cold water supplies before beginning.
P U T T Y
S P O U T B A S E
S I N K O R
M O U N T I N G
S U R F A C E
2
3
7
by
C O L L E C T I O N
™
T H E
4
5
6
8
2
M 9 6 8 4 6 0 A
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
TOOLS REQUIRED
Regular Screwdriver
Assemble RUBBER WASHER (4), BRASS WASHER (5), and threaded LOCKNUT (6) onto SHANK (3) from underside
of sink or mounting surface. Hand tighten LOCKNUT (6) and check that rotation of HANDLE (7) from HOT to COLD
is centered.
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening
the screws slightly each time until all are snug to ensure even pressure.
(A) Installation with ESCUTCHEON (1).
Apply a bead of putty to bottom edge of ESCUTCHEON with PUTTY PLATE (1).
Insert supply HOSES (2) and SHANK (3) through hole of ESCUTCHEON with PUTTY PLATE (1) and mounting surface.
Follow mounting instructions below to secure faucet to mounting surface.
(B)
Installation less ESCUTCHEON (1).
Discard ESCUTCHEON with PUTTY PLATE (1).
Insert supply HOSES (2) and
SHANK (3) through mounting hole and
seat SPOUT BASE onto sink or mounting surface.
Do not use putty.
