ANTI-BACTERIAL
3
3
Anti-bacterial
:
·
·
·
JISZ2801-2010 (ISO22196 Method)
Japan LIXIL Corporation R&D Division Analysis & Assessment Center Office
Antibacterial activity value is over 2.0
Testing bacteria:
7. It is difficult to achieve the desired antimicrobial effect if there is dust or oil on the toilet seat surface.
For use-by date
Environmental
Conditions
Voltage ·
AC230V·50Hz
Room Temperature
20°C
Installation Requirement
Private Bathroom, installed separately from the shower room
Load Conditions
Perform standard setting based on product specifications designed
Theoretical Time
Service & Maintenance
Using frequency: defecate: once/day for each person
urinate: male: 4 times/day for each person;
and female: 4 times/day for each person
Can use E-bidet function for 15 seconds each time.
Following the procedures shown in the instruction, and perform service, inspection and repair.
NOTICE:
15°C·0.2MPa
Because the storage environment, the environment (such as the stability of electric power, environmental
temperature and humidity, water, etc.), differences in methods of use, safe use of the actual product varies.
The actual use of security products at public places may be significantly reduced.
Service time without accident does not mean free warranty.
For the protection of the safe use of the product, please follow the instructions described in the method used,
the daily cleaning and maintenance when necessary (such as unusual time), please contact our service hotline.
For occasional accidents safe use period, the company will not compensate and not provide free repairs.
Within the scope permitted by law, the Company reserves all the right of final interpretation for safe use.
Theoretical use-by date refers to theoretical service time without accident for the E-bidet with standard
working condition, proper service and management.
Please replace immediately when the product has passed theoretical use-by
date. Or may cause fire or injury due to component deterioration.
Toilet seat with antibacterial effect: KILAMIC antibacterial materials are used for toilet seat.
And toilet seat has passed the specific certification by SIAA.
KILAMIC antibacterial material has effect with inhibition of proliferation of bacteria on the surface of products.
Control quality management under ISO 22196 evaluation system and Society of international sustain growth for Antimicrobial
Articles (SIAA) guidelines. It has confirmed that the antibacterial properties qualified through rigorous experiments.
Antibacterial activity value is over 2.0.
Explanation about KILAMIC materials:
1. Antibacterial effect: inhibition of proliferation of bacteria on the surface of products.
2. Antibacterial method: mix the anti-microbial agent into resinous material
3. Used antibacterial agent: silver-ion inorganic anti-microbial agent
4. Experimental method:
5. Experimental organization:
6. Experimental result:
colon bacillus and staphylococcus aureus
Standard working condition
Frequency
Water Inlet Temperature & Pressure
Rated Load
Family of Four (2 male and 2 female),
Theoretical use-by date
YEARS
WARNING
ANTI-BACTERIAL
ANTI-BACTERIAL
