30
CLEANING
AND CARE
When Cleaning Function Decreases
Cleaning Method of Strainer
1.
Turn off water supply valve and stop
water
supplying.
2.
Remove the strainer
by rotating in an anti-
clockwise direction
.
(
There will be some water
flow
,
please put a
container
underneath)
3.
Wash the dirt attached to strainer with
water.
4.
Turn the strainer clockwise
to
tighten
.
Confirm that there are no dirt
or debris on
the
O ring when installing.
5.
Open the water supply valve to the original
place.
6.
Be sure to do the test run at last.
When using the product for a long period, or
the spray strength decreases
, please clean the
strainers of product in following order.
Note: It is recommended that this is cleaned every 6-12 months.
CAUTION
Please turn off water supply valve
before removing the strainer.
When installing the strainer, please
tighten it without leaving any gaps.
When installing the strainer, please
confi rm that
O ring is clean and free
of dirt
.
1.
2.
3.
4.
5.
OFF
ON
