2
8
CLEANING
AND CARE
After applying the neutral detergent on a soft cloth
or sponge, clean it with cold water or warm water.
Removal of Nozzle Shutter
Installation of Nozzle Shutter
CAUTION
Do not clean it with a dry cloth or toilet paper.
Do not clean it with a toothbrush.
.
Nozzle shutter can be removed for cleaning.
Open the lid and toilet seat.
Press
【
Seat Temp
】
+
【
Water Temp
】,
extend the nozzle.
Nozzle sticks out, nozzle shutter opens.
Nozzle sprays water for 3 seconds.
Pull the nozzle shutter up with your hands to remove it.
If difficult to remove, please push the flanged arm and
remove the shutter.
Press the [STOP] key, nozzle will retract back.
Clean the removed nozzle shutter.
When nozzle does not
come
out, press the clips
(2 locations) of nozzle shutter into the groove on
the bottom.
When nozzle
comes
out, press STOP key to retract it back.
CAUTION
Pay attention to the orientation when installing ,
the sliding surface faces outward.
Flanged arm
Press inward until a "click" sound is heard.
Do not apply excessive force.
Groove on the bottom
Seat Temp
Water Temp
Clips
Sectional view
Install the shutter
parallel
Cleaning of Nozzle Shutter