754072-100 Rev. A
11
POST INSTALLATION CLEAN-UP
Remove all construction debris from bath. Tile grout can be removed with a wooden popsicle stick or tongue depressor.
Do not use wire brushes or any other metal implement on bath surface.
Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent.
Stubborn dirt or stains may be removed using granular Spic and Span® mixed with water.
Painter's naphtha can be used to remove excess adhesives and/or wet oil-base paint.
AFTERCARE and CLEANING
•
The high gloss surface is resistant to impact and chemicals and will retain its lasting luster with proper care and maintenance.
•
Always fill the tub with temperate water. Excessively hot water may cause surface damage
dry in the tub may cause surface damage.
•
Clean after use with a mild liquid household detergent cleaner. Do not use Lestoil, Lysol Disinfectant (spray or concentrate),
or Lysol Basin, Tub and Tile Cleaner, Windex, Mr. Clean, Dow Disinfectant Bathroom Cleaner, or cleaning products in
aerosol cans.
HARSH CHEMICALS SHOULD NEVER BE USED ON ACRYLIC SURFACES.
• Do not use wir
e brushes, knives or sharp objects to remove stains, cigarette tar deposits,or other surface blemishes.
•
Abrasive cleaners or powders must not be used, since they will dull the surface. If the glossy surface looses its sheen, dulled
areas can be restored by rubbing with a white "automotive type" polishing compound and waxing with a "liquid wax."
•
Do not wax areas where you walk or stand.
• Do not allo
w nail polish remover, acetone, dry cleaning fluid, paint remover or other solvents to come into contact with the surface.
• Clean the surr
ounding surface immediately after using caustic drain cleaners.
• Bur
ning cigarettes will damage the surface.
• Should damage t
o the fixture occur, repairs can be made quickly and easily.
Your distributor or builder can provide details.
• Do not per
mit drain cleaner to enter the circulation system.
