American Standard Advanced Clean 3.0 SpaLet Скачать руководство пользователя страница 36

Страница: 36 / 56

33 - EN

Removing and Cleaning Seat Lids

When cleaning the toilet bowl, take
care not to splash the seat unit with
detergent. Before installing the seat
unit, wipe the detergent off from the
toilet bowl using a cloth damped
with water.

* Leaving detergent on the seat unit may

lead to product failure.

Do not put your hand or any object
inside the air outlet or around the
nozzle.

* Doing so may injure your hand or lead to

product failure.

Wipe the seat unit clean using a soft

cloth dampened with water.

Wipe off here.

Turn

counterclockwise.

" " mark on the mounting plate

Protrusion on the

rear of the seat unit

Wipe off here.

Turn

counterclockwise.

" " mark on the mounting plate

Protrusion on the

rear of the seat unit

1. Place the seat unit on the toilet bowl. Align the inverted triangle

mark ( ) on the mounting plate with the protrusion on the rear of

the seat unit.

* See the user manual for details on cleaning

the toilet bowl.

2. Cleaning

3. Assembling the Seat Unit

DANGER

Do not pour water or cleanser inside this

product. Do not splash water on the seat

unit or the power plug.

* There is danger of electric shock or fire.

Slightly raise the front of the seat.

Slide the seat on to the

mounting plate. Push the lock lever to secure the seat.

* If this product is not pushed all the way back, the lock lever

cannot be pushed back in.

After locking this product in place, shake it slightly back and forth

and left and right, making sure it has been securely locked in place.

4. Insert the power plug into the outlet.

At this time, check to make sure the water temperature and seat

temperature indicator LEDs are illuminated.

Check that the seat unit has been completely locked in place.

* If not, the seat unit may slide off the toilet bowl.

Do not bend any hose using excessive force.

* Doing so may permanently deform it or cut off the water supply.

5. After completing the assembling, perform an operational

check.

3. Open the water shut-off valve to

its original position and run water

through this product.

* Make sure water is not leaking
from any of the joints.

CAUTION

Turn

counterclockwise

Содержание Advanced Clean 3.0 SpaLet

























































Результаты поиска

Содержание Advanced Clean 3.0 SpaLet

Отзывы:

Похожие инструкции для Advanced Clean 3.0 SpaLet

Бренды по названию

Популярные бренды

American Standard Advanced Clean 3.0 SpaLet, Руководство пользователя

Результаты поиска

Содержание Advanced Clean 3.0 SpaLet

Отзывы:

Похожие инструкции для Advanced Clean 3.0 SpaLet

Бренды по названию

Популярные бренды