American Standard Advanced Clean 3.0 SpaLet Скачать руководство пользователя страница 10

Страница: 10 / 56

7 - EN

Open the Water Shut-off Valve.

If the water shut-off valve is closed, turn it counterclockwise

to open.

If the valve is already open, its position has been adjusted.

Be sure to set the valve to the original position if you turn it.

STEP

Insert the Power Plug

Into the Outlet.

Confirm that the power LED on the seat unit is lit.

STEP

Names of Parts/Preparation and Checks Before Use

Vacuum Breaker

Vacuum breaker

The vacuum breaker is built into the seat unit.

The vacuum breaker requires periodic inspection.

Mounting Plate and Lock Lever

Mounting plate

Seat unit

Lock lever

Toilet bowl

The mounting plate is used to remove

the seat unit from the toilet bowl for cleaning

and maintenance.

(

Page 32)

Turn counterclockwise

Water shut-off valve

[CAUTION]

•

When disconnecting and reconnecting the power plug,

wait for approximately 10 seconds before reconnecting.

Seat unit indicator section

Power indicator

Connect the grounding wire

securely to the grounding

terminal of the power outlet.

Failure to observe this warning

can result in electric shocks.

Grounding

●

● This product should

be connected only to a

120-VAC power source.

●

● Do not use a multi-outlet

socket.

Failure to observe this warning

may cause a fire.

Prohibited

WARNING

Power plug

●

Then check that the power LED

lights.

The power LED on the indicator lights (green).

If the power LED does not light, the main power may have

been turned off. If "OFF" is displayed on the LCD, press

Power button on the remote control.

WARNING

Содержание Advanced Clean 3.0 SpaLet

























































Результаты поиска

Содержание Advanced Clean 3.0 SpaLet

Отзывы:

Похожие инструкции для Advanced Clean 3.0 SpaLet

Бренды по названию

Популярные бренды

American Standard Advanced Clean 3.0 SpaLet, Руководство пользователя

Результаты поиска

Содержание Advanced Clean 3.0 SpaLet

Отзывы:

Похожие инструкции для Advanced Clean 3.0 SpaLet

Бренды по названию

Популярные бренды