5
5.
Garantice la perpendicularidad de la taza con respecto a la pared terminanda, utilizando
las herramientas adecuadas.
Guarantee the bowl perpendicularity with finished wall, using the appropriate tools.
Nivel Piso Terminado
Finished Floor level
Nivel Par
ed T
erminada
Finished W
al
l level
6.
Instale las
arandelas plásticas
y
metálicas
como se indica en el gráfico, coloque
las
tuercas
y apriete. Si es necesario, corte el exceso del tornillo con una sierra
(aproximadamente 6 mm.),
finalmente instale los
casquetes
sobre los
tornillos.
(Estos
pueden venir dentro del asiento sanitario).
Install the
plastic
and
metal washer
in “up” position as marked, engage mounting
nuts
and tighten. Cut off excess bolt lenght with hacksaw
(approximately 1/4”)
and snap
bolt
caps
in place.
(These can come inside the toilet seat).
x2
x2
6 mm.
(1/4”)
Arandela plástica x2
Plastic washer x2
Arandela metálica x2
Metal washer x2
Tuerca x2
Nut x2
Tornillo x2
Bolt x2
Casquete x2
Bolt cap x2