background image

1

Models 58500-Series

Lite Flush Electric Toilets

FEATURES

Space saving stylish design

• 

Compact size, rotatable seat

• 

Virtually silent operation

• 

Choice of leaving bowl wet or       dry after use

• 

Non-clogging large bore flush pump macerates waste

• 

Uses less than 1.0 amp/hour per day

• 

ISO 8846 MARINE - Ignition Protection

• 

MODEL RANGE

Description

Part no.

Fuse/

 Breaker

Foot-

switch 

Variant 
(11 kg, 

24 lbs)

Lite Flush 
12V

58500-0012

25 amp

Lite Flush 
24V

58500-0024

15 amp

Control 

Panel 

Variant 

(11kg, 
24lbs)

Lite Flush 
12V

58500-1012

25 amp

Lite Flush 
24V

58500-1024

15 amp

Foot-switch controller

CAUTION:

When  power  is  first  applied  to  the  unit, 
the  flush  pump  will  always  activate  to 
discharge the contents of the bowl.

The lite flush toilet offers a single touch fully automatic 
foot-switch operation.

The first press of the foot-switch activates the rinse 

• 

pump and adds approximately 0.6 Litres, less than 
1/5 of a us gallon, of water to the bowl.
The  second  press  of  the  foot-switch  activates  the 

• 

rinse pump adding a further 0.6 Litres, less than 1/5 
of  a  us  gallon,  of  water  to  the  bowl  and  then 
operates the flush pump, discharging the contents 
and leaving the bowl dry.

This  is  the  complete  2  stage  flush  cycle. You  may 
decide  to  leave  the  bowl  dry  or,  by  pressing  the 
foot-switch  once  more,  leave  the  bowl  wet,  ready 
for the next user.

Note:  The correct use of the toilet is to;

Press the foot-switch and add water to the bowl

1. 

Use the toilet

2. 

Press the foot-switch to add water and

3. 

Then discharge

4. 

Touch pad controller

The  lite  flush  toilet  features  a 
multi-function 'one touch' control 
pad  offering  four  options  -  'fill', 
'quick flush', 'flush' or 'empty'.
In addition, the owner can set the control at any time 
so that the bowl is left either 'dry' or 'wet' after flushing. 
The  recommended  'dry'  setting  minimises  total  water 
usage. If water usage is not a concern, the 'wet' setting 
automatically  adds  1  quart  (1  litre)  of  water  after 
flushing, ready for the next user.
Simultaneously  holding  down  both  'quick  flush'  and 
'flush'  buttons  for  5  seconds  switches  between  bowl 
always left 'dry' and bowl always left 'wet' modes.

'Fill' may be touched when the bowl is 'dry' to add 

• 

1  quart  (1  litre)  of  water  before  use,  if  thought 
necessary.
'Quick flush' first rinses and then empties the bowl 

• 

after light use. On 'dry' setting, this uses less than 
1 quart (1 litre) of water.
'Flush' rinses and empties the bowl twice after heavy 

• 

use.  If  the  bowl  is  'dry',  touching  'fill'  first  is 
recommended. This uses just 2.5 Quarts (2.5 Litres) 
of water.
'Empty'  does  exactly  what  it  says  without  adding 

• 

any water, whenever desired.
Even when the bowl is apparently 'dry', there is an 

• 

anti-odour water lock in the pump housing.

Summary of Contents for 58500 Series









Reviews: