American Sanders B-2+DC, Руководство оператора

Страница: 7 / 46

(Canada, Mexico, and United States)
Grounding Pin
Grounded Outlet Box
Grounded Outlet
Figure 3
7
Electrical Connection Instructions
EN
120 VOLT MACHINES
Instructions for connection to the power supply and the
electrical ground.
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to
reduce the risk of electrical shock. This product is equipped with a cord
having an equipment-grounding conductor and grounding plug. The
plug must be inserted into an appropriate oulet that is properly installed
and grounded in accordance with all local codes and ordinances.
WARNING:
Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug provided
with the product - if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This product is for use on a nominal 120 volt circuit and has a grounding attachment plug that looks like the plug illustrated in Fig. 3. Make sure
that the product is connected to an outlet having the same configuration as the plug. No adaptor should be used with this product.
WARNING:
To prevent possible electric shock, protect the machine from rain. Keep the machine in a dry building.
WARNING:
To prevent possible electric shock, always usea 3-wire electrical system connected to the electrical ground. For maximum
protection against electrical shock, use a circuit that is protected by a ground fault circuit interrupter. Cronsult your electrical contractor.
WARNING:
Do not cut, remove or break the ground pin. If the outlet does not fit the plug, consult your electrical contractor.
WARNING:
: Have worn, cut or damaged cords replaced by an authorized service person.
EXTENSION CORDS
Use only an approved extension cord with three conductors, a plug with three terminals, and a connector body with three holes. The machine
has a power cord with wire size 14 AWG (AWG means American Wire Gauge).
WARNING:
:
If you use an extension cord, use an extension cord with minimum wire size 12 AWG. Do not use an extension cord longer than 50 feet.
Do not join two extension cords