background image

42

Limited Warranty

American B-2+DC 7" Edger

LT0695600_H; 120318

Copyright 2018 American Sanders

TO QUALIFY FOR THIS WARRANTY

(1) Machine must be registered within 30 days from the time of

purchase on a form provided by American Sanders. Your

American Sanders Distributor is responsible for the registration

of your machine. Please cooperate with your Distributor in

supplying necessary information on the card.

(2) The machine must have been purchased from American Sanders

or an authorized American Sanders Distributor.

(3) This warranty extends to the original purchaser only and is not

transferable to subsequent owners.

TIME PERIODS

FIVE (5) YEAR WARRANTY - For the RS-16DC HDTR Rotary

Sander. Warranted to be free from defects in material and

workmanship for a period of five (5) years from the date of

purchase by the original owners. (See Exclusions)

EXCLUSIONS (Not Covered by Warranty)

(1) Expendable wear items and parts that fail through normal wear

by reason of their characteristics (cords, pads, pad holders,

belts, wheels, carbon motor brushes, bulbs, filters, bags, or other

consumable parts).

(2) This warranty does not extend to parts affected by misuse,

neglect, abuse, accidents, damage in transit, overloading

the capacity of the machine, failure due to lack of proper

maintenance or care as described in the operating and

maintenance instructions. All defective parts must be returned to

the distributor for credit.

(3) Minor adjustments, such as tightening of screws or bolts not

connected with the replacement of parts, are not covered.

(4) Repairs or alterations by an organization other than the factory or

an Authorized Service Center are not covered and will void any

American Sanders warranty as to the parts or systems repaired

or altered by a non-authorized organization.

THE OBLIGATION OF AMERICAN SANDERS

(1) The obligation of American Sanders under this warranty is limited

to repairing or replacing, at its option, any part which is proven to

be defective in material or workmanship under normal use for the

applicable period stated above.

(2) Warranty repairs will be made by your American Sanders

Distributor without charge for parts and labor. They will be

compensated with a warranty labor rate of $45.00 per hour, for

the first year of ownership.

(3) Parts repaired or replaced under this warranty are warranted only

during the balance of the original warranty period. All defective

parts replaced under these warranties become the property of

American Sanders.

WARRANTY SERVICE

To obtain warranty service, take your machine and proof of

purchase to any authorized American Sander Distributor. American

Sanders will not reimburse expenses for service calls or travel.

For the Distributor in your area, call American Sanders Customer

Service Department at 800-367-3550 or 336-372-8080. If you are

dissatisfied with the service that you receive, call or write American

Sanders Customer Service Department for further assistance

INSTRUCTIONS AND CONDITIONS FOR WARRANTY

REIMBURSEMENT

• 

Order replacement part: Orders will be processed and charged, as 

normal procedure.

• 

Call American Sanders for RIA number.

• 

You will need the Machine Serial Number and the Machine Model 

Number.

• 

Parts must be returned, accompanied with the RIA number to be 

eligible for warranty credit.

• 

All Warranty Parts will be shipped prepaid UPS Ground, any other 

method will be at the recipients expense.

• 

Freight on any Warranty Part after 30 days must be paid for by the 

Purchaser.

• 

Warranty labor rate is $45.00 per hour.

• 

Credit will be issued upon completion of the above steps, at the 

above rates.

Transportation  of  hazardous  waste  or  contaminated  equipment  is 
subject to various laws and regulations. In returning machines, parts, or 

accessories under this limited warranty, the end user must certify in writing 

that the machines, parts, or accessories being returned have not been 

used for handling, clean up, or disposal of hazardous waste or hazardous 

materials including but not limited to such things as asbestos, anthrax 

etc. or if the machines, parts, or accessories being returned have been 

used for handling, clean up, or diposal of hazardous waste or hazardous 

materials, then the end user must have the machines, parts or accessories 

decontaminated by licensed and qualified decontamination professionals 

and  provide  written  certification  of  this  decontamination  signed  by  the 

decontamination professionals. These machines, parts or accessories 

are to be returned only to the local American Sanders Service Center for 

warranty service along with decontamination certification.

DISCLAIMER OF CONSEQUENTIAL

THERE  ARE  NO  WARRANTIES  THAT  EXTEND  BEYOND  THE 

DESCRIPTION OF THE LIMITED WARRANTIES STATED WITHIN. NO 

OTHER  WARRANTY,  EXPRESSED  OR  IMPLIED,  INCLUDING  BUT 

NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABLILITY 

OR  FITNESS  FOR  A  PARTICULAR  PURPOSE,  IS  MADE  EXCEPT 

AS  EXPRESSLY  STATED  HEREIN.  ANY  STATUTORY  IMPLIED 

WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR PURPOSE, THAT ARE IMPOSED BY 

LAW DESPITE THE EXPRESS LIMITATION OR WARRANTIES ABOVE, 

ARE  EXPRESSLY  LIMITED  TO  THE  DURATION  OF  THE  WRITTEN 

WARRANTY. BUYER UNDERSTANDS, ACKNOWLEDGES AND AGREES 

THAT THE REMEDIES PROVIDED UNDER THIS LIMITED WARRANTY 

ARE  THE  SOLE  AND  EXCLUSIVE  REMEDIES  AVAILABLE  TO  THE 

BUYER.  AMERICAN  SANDERS  DISCLAIMS  ANY  RESPONSIBLITY 

FOR LOSS OF USER TIME OF THE AMERICAN SANDERS MACHINE 

OR  ANY  OTHER  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES. 

THIS  INCLUDES,  BUT  NOT  LIMITED  TO  INDIRECT,  SPECIAL  OR 

CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION 

WITH THE FURNISHING, PERFORMANCE, USE OF OR INABILITY TO 

USE THE MACHINE. ANY EXTENSIONS OF OR MODIFICATIONS MADE 

TO  THIS  WARRANTY  BY  A  DEALER/DISTRIBUTOR  OF  AMERICAN 

SANDERS  ARE  THE  SOLE  RESPONSIBILITY  OF  THE  DEALER/

DISTRIBUTOR.

Содержание B-2+DC















































Отзывы:

Похожие инструкции для B-2+DC