American Megatrends StorTrends 3600i Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 100

American Megatrends StorTrends 3600i Скачать руководство пользователя страница 16

StorTrends® 3600i/3610i Dual Controller IP-SAN Storage Appliance Setup Guide

Page 16

Completing the Hardware Installation

Next,  you should check to make  sure that the hard disk drives have been properly inserted
and  have not come  loose in  transit.
If  the Hard  Disks  are shipped separately, you have to install the drives in the order as
printed on the top of the chassis. The drives will  also have printed labels showing the slot
numbers of  the hard drives.

S tep

Description

1

All hard disk drives can be accessed from the front of your StorTrends Dual Controller IP-SAN storage
appliance. Verify that the hard disk drive trays are inserted all the way into its bay.

2

Verify that all cables in your rack are not obstructing the airflow of your StorTrends Dual Controller IP-
SAN storage appliance.

3

Connect network cables from both NIC-1 and NIC-2 on both the

Left Controller

and the

Right Controller

of your StorTrends Dual Controller IP-SAN storage appliance to your network.

NOTE:

CAT6 network cables gives better performance than CAT5e network cables.

NOTE:

For best practices, connect through two (2) switches to avoid a single point of failure on your

network.

NOTE:

Your StorTrends Dual Controller IP-SAN storage appliance requires a minimum of one network

connection per controller.

4

Plug  the two power cords from the power supply units into a high-quality  power strip that offers protection
from electrical  noise  and power surges.  It is highly recommended  that you use a dedicated Uninterruptible
Power Supply (UPS). Please refer Step 5, for connecting  instruction of Automatic UPS Switching  M odule
(AUSM ) with UPS.

NOTE:

As soon as you plug in one power cord, your StorTrends Dual Controller IP-SAN storage

appliance will begin to power up the IPM I in both the Left Controller and the Right Controller. This is
normal.

«
...
14
15
16
17
18
...
»

Содержание StorTrends 3600i





































































































Отзывы:

Нет отзывов