American Megatrends MegaRAC M300V, Руководство пользователя

Страница: 7 / 87

Chapter One : Introduction 1
Chapter 1 Introduction
16MB Flash
Module 16MB Frame
Buffer Memory
American Megatrends Inc.
MegaRAC MG9091B
Controller Chip
DDR2 Key
OPMA Specification (Ver. 1.2)
Notice that the notch is located
closer to the leads on the right
than the leads on the left.
32 MB SOC
Memory
Reset Switch
(push to reset,
button is located
on the left side)
The MegaRAC M300V card is a high-end OPMA service processor based on AMI's MG 9091B
(Verbena II) System on Chip (SOC). The MegaRAC M300V card allows for complete server
management, with text and graphical redirection, in a 2.50' x 2.75' form factor. The MegaRAC
M300V card enables OEMs and motherboard manufacturers to easily integrate KVM server
management into their server and board designs.
The MegaRAC M300V card is a 2.5" x 2.75" daughter card module, which implements AMI's
extensive IPMI and KVM/IP technology in a management card solution compatible with all Intel
and AMD -type motherboards with OPMA connector. The module interfaces with various
components on the motherboard to manage the server efficiently.
The MegaRAC M300V card is based on AMI's MG 9091 (Verbena II) highly integrated System
on Chip (SOC). Verbena II SOC provides both Serial over LAN and KVM over LAN capability,
as well as a 10/100 Base-T LAN connection for dedicated management LAN. Serial over LAN
allows for remote operation of the server via a terminal interface, connected via an RS232 link.
KVM over LAN allows for remote server operation that adds graphical redirection to text, using
the server’s video output and keyboard and mouse inputs.
The MegaRAC M300V card features video capture of up to 1280 x 1024, applying AMI's
AAVICAII compression engine, which uses intelligent algorithms to significantly reduce network
traffic and provide high-performance redirection. The engine interfaces with the server’s DVO
video interface and USB bus.
The MegaRAC M300V card implements media redirection for the CD/DVD/ROM drive and
floppy drive at the same time. This feature enables remote installation of the operating system or
applications.