American Megatrends MegaRAC M300V, Руководство пользователя

Страница: 22 / 87

16 MegaRAC® M300V Card Implementer’s Reference and User’s Guide
Event Log
On this page there is a table of the events from the system's event log.
Item Description
Select an event
log category Select one of the following event categories:
•
Sensor-Specific Events
•
BIOS Generated Events
•
System Management Software Events
Event Log You can obtain the following information for each event:
•
Event ID
•
Time Stamp
•
Sensor Name
•
Sensor Type
•
Description
Clear Event
Log button Left click the
Event Log
menu item to view and clear the event logs.
Sensor Monitoring Options
This page allows you to select sensor monitoring options. Sensors can be monitored external
baseboard management controller (BMC) connected to the PMB bus or you can directly monitor
sensors on the I2C bus.
Item Description
Monitoring
Options You can select how you want to monitor the sensors.
Direct Monitoring of sensors on the I2C bus (needs PMCP files)
Monitoring via External BMC (needs IPMB connection)
External BMC
Slave Address If being monitored by an external BMC, you will need to provide the slave
address so that the MegaRAC® M300V card will be able to read data from
the onboard BMC on the motherboard/ server board. 0x20 is the address most
commonly used.
PMCP
monitoring file
(sp.bin) Select the Soft Processor (SP) File with the
BIN
file extension.
Sensor
definitions file
(sdr.dat) Select the SDR File with the
BIN
file extension.
Upload new
file (if one
already exists) Select this option if the SDR and Soft Processor (SP) File are already loaded
on the card and you want to have it replaced with the new file.
Browse button Use this button to look for the SDR and Soft Processor (SP) File.
Save button Use this button to save your settings.