American Megatrends Atlas III PCI Скачать руководство пользователя | Manualshive

Страница: 2 / 80

background image

Atlas PCI-III PCI Pentium ISA Motherboard User’s Guide

ii

© Copyright 1997 American Megatrends, Inc.
All rights reserved.
American Megatrends, Inc.
6145F Northbelt Parkway
Norcross, GA 30071

This publication contains proprietary information which is protected by copyright. No part of this publication may be reproduced, transcribed,
stored in a retrieval system, translated into any language or computer language, or transmitted in any form whatsoever without the prior written
consent of the publisher, American Megatrends, Inc.

Limited Warranty

Buyer agrees if this product proves to be defective, that American Megatrends, Inc. is only obligated to replace or refund the purchase price of this
product at American Megatrends’ discretion according to the terms and conditions on the motherboard warranty card. American Megatrends shall
not be liable in tort or contract for any loss or damage, direct, incidental or consequential. Please see the Warranty Registration Card shipped with
this product for full warranty details.

Limitations of Liability

In no event shall American Megatrends be held liable for any loss, expenses, or damages of any kind whatsoever, whether direct, indirect,
incidental, or consequential, arising from the design or use of this product or the support materials provided with the product.

Trademarks

Intel and Pentium are registered trademarks of Intel Corporation.
MS-DOS, Microsoft Word, and Microsoft are registered trademarks of Microsoft Corporation.
AMD is a registered trademark of Advanced Micro Devices, Inc.
SMC is a registered trademark of Standard Microsystems Corporation.
IBM, AT, VGA, PS/2, OS/2, and EGA are registered trademarks of International Business Machines Corporation. XT and CGA are trademarks of
International Business Machines Corporation.
Fujitsu is a registered trademark of Fujitsu America, Inc.
Motorola is a registered trademark of Motorola Corporation.
Hitachi is a registered trademark of Hitachi America, Ltd.
PNY is a registered trademark of PNY Corporation.
Oki is a registered trademark of Oki America, Inc.
NEC is a registered trademark of NEC Corporation.
Samsung is a registered trademark of Samsung Electronics Corporation.
Siemens is a trademark of Siemens Corporation.
Mitsubishi is a registered trademark of Mitsubishi Electronics of America.
Micron is a registered trademark of Micron Corporation.
SCO, UnixWare, and Unix are registered trademarks of The Santa Cruz Operation, Inc.
Toshiba is a registered trademark of Kabushiki Kaisha Toshiba.
VESA is a trademark of the Video Electronics Standards Association.
All other brand and product names are trademarks or registered trademarks of their respective companies.

Revision History

2/26/97

Initial release.

11/20/97

Added VRM information.

10/16/98

Added J4 description.

«
1
2
3
4
...
»

Содержание Atlas III PCI

















































































Отзывы:

Нет отзывов

Похожие инструкции для Atlas III PCI

Бренд: Samsung Страницы: 68

Бренд: Intel Страницы: 6

Бренд: Texas Instruments Страницы: 8

Бренд: Qiyang Страницы: 27

Бренд: NXP Semiconductors Страницы: 6

Бренд: IEI Technology Страницы: 17

otometrics HI-PRO 2

Бренд: natus Страницы: 22

PENTIUM PRO W6-LI

Бренд: Micronics Страницы: 82

Бренд: IBASE Technology Страницы: 64

B85M-P32 series

Бренд: MSI Страницы: 186

Бренд: Biostar Страницы: 51

LCD Programmer Module

Бренд: Xtralis VESDA Страницы: 54

Бренд: ECS Страницы: 92

Бренд: Intel Страницы: 76

Бренд: NXP Semiconductors Страницы: 35

Бренд: Icop Страницы: 31

Бренд: Supero Страницы: 89

Бренд: Sleipner Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды