Page
8
of
15
AE-G12N & G22N
Operation Manual
773.376.0800 (P) • 773.376.2010 (F) • 3131 S. Canal St. Chicago, IL 60616
Revision 8/2015
Assembly Instructions
9. Place the coupling ring onto the feed chamber and rotate clockwise.
10. Hand tighten the coupling ring and then rotate it backward (counterclockwise) very slightly, at
most ~1/8”.
Do not use a tool or over tighten!
See Figure 8 and Figure 9.
11. Place the feeder pan onto the feed chamber and make sure it is fully inserted. See Figure 10
12. Make sure the forward/reverse switch is in the OFF position and plug the grinder in.
IMPORTANT: The coupling ring holds all components together and should not be
loose, but should not be too tight. Over-tightening the coupling ring will cause
motor strain and cause damage to the grinder not covered under warranty.
THEN
Figure 8
Figure 9
Figure 10
