Page
5
of
15
AE-G12N & G22N
Operation Manual
773.376.0800 (P) • 773.376.2010 (F) • 3131 S. Canal St. Chicago, IL 60616
Revision 8/2015
INSTALLATION:
1.
Read this manual completely before installation or operation.
DO NOT
proceed with
installation and operation if you have any questions or do not understand what is written
in this manual.
Contact American Eagle if you need assistance.
2.
Remove the two screws from the top of the grinder by using the allen wrench that was
included with the grinder.
3.
Place the handle on top of the grinder, then insert the two screws into the holes of the
handle. Install the handle on the motor unit by tightening the screws with the allen
wrench.
Hand tighten only!
4.
Remove the grinder from the box.
5.
Inspect and make sure the rubber feet are securely screwed to the grinder.
6. Inspect the meat grinder to check that all parts have been provided.
7. Thoroughly clean the machine before using. Refer to Cleaning Procedures section.
8. Contact American Eagle if you have any questions or problems with the installation or
operation of this grinder.
Do not return to retailer or dealer!
Installation Instructions
THIS MACHINE IS DESIGNED WITH A THREE-PRONG PLUG FOR PROPER
GROUNDING. THE OUTLET USED WITH THE PLUG MUST BE PROPERLY
GROUNDED. CONTACT AN ELECTRICIAN TO FIX YOUR OUTLET IF IT IS NOT
THE PROPER TYPE BEFORE OPERATING THE MACHINE. DO NOT REMOVE OR
CUT OFF THE THIRD GROUND PRONG OR USE AN ADAPTER PLUG.
