American Dynamics Hybrid Digital Video Recorder, Руководство пользователя

Страница: 154 / 160

154
Hybrid Digital Video Recorder
15. If installing an HDVR server, configure the directory settings. To do this, complete the following
steps:
A. In the HDVR Client software, select the ActiveDirectory/LDAP tab on the System Setup
page.
B. Select the Enable Directory Service checkbox
C. Select Active Directory in the LDAP Schema drop-down list.
D. Enter the Active Directory server’s IP address in the Hostname/IP Address field.
E. Select the SSL checkbox if you want LDAP operations to use secure SSL. If so, see the
Configuring SSL on an HDVR Server document.
F. Verify the Active Directory server’s connection port. Unless you have reconfigured your
Active Directory server, the port should be 636 when using SSL, or 389 without SSL.
G. Enter the LDAP Base DN, the container of all directory user accounts or groups that you
want to map in the HDVR software. For example, if the domain were hdvr.test.com , the
LDAP Base DN might be:
CN=Users, DC=hdvr, DC=test, DC=com
Check with the system administrator for the correct LDAP Base DN for your situation.
NOTE:
H. Enter the LDAP Binding DN, the fully qualified distinguished name (DN) of a directory user
who has access to view the records of the directory user accounts. It is recommended that
you enter the Administrator user account as the LDAP Binding DN. For example, if the
domain were
hdvr.test.com , the LDAP Binding DN of the Administrator account would be:
CN=Administrator, CN=Users, DC=hdvr, DC=test, DC=com
I. Enter the password for the account entered in the previous step.
J. To prevent any non-directory users that have previously been created from connecting to
the HDVR server (optional), deselect Enable Local User Accounts.
K. Click Apply to connect. An indicator on the ActiveDirectory/LDAP tab displays the success
or failure of the connection attempt.