American Dynamics ADR8030X, Инструкция по эксплуатации

Страница: 3 / 52

NOTICE
PLAYBACK
OPERATION
RECORDING
OPERATION
PREPARATION
2
INTRODUCTION
ENGLISH
I
NTRODUCTION
FEATURES
■
Restart record function.
This function enables the VTR to automatically restart the recording
process in the event of a power failure. After power is restored, the
VTR will restart the recording process. (See page 22.)
■
Shuttle function.
With the shuttle dial, a wide variety of playback functions are
available. They include picture search, slow playback, field
advance playback, reverse field advance playback, and still
playback (See pages 38 - 39.)
■
Clean slow and still.
A clean crisp image is crucial and is the main purpose for the
existence of a surveillance recorder. This VTR offers a clean and
noiseless playback, that is essential for surveillance applications.
■
Time date search function.
With time date search, it is possible to search for a picture recorded
on a certain time and date. (See page 40.)
■
Head cleaning function.
Head cleaning is automatically performed at the end of timer
recording and at tape end in order to prevent head jamming. There
is also head cleaning once every two hours when operating in time
modes of 24 hours or more.
■
Automatic head clog detection.
When recording in time mode 120 ~ 168 hours or in the One-shot
mode, video head clog detection is automatically carried out once
for every two hours. When the video head clog is found, head
cleaning is carried out for approximately 10 times. When cleaning
is still not possible, "E-6" is displayed.
■
Record check function.
By pressing the record check button during recording, the VTR
automatically replays the last few seconds of the recording. (See
page 3, note
2
).
■
Wired remote control function (Option)
The wired remote control allows the following VTR functions.
• Fast Forward
• Forward picture search
• Rewind • Reverse picture search
• Pause • Still
• Field advance (forward, reverse)
• Play
• Stop
• Play back time
■
Various time modes.
With a E-180 tape, it is possible to record over periods ranging from
3 to 168 hours.
A3, A12, A18, A24, 48, 72, 120, and 168 modes are explained in
more detail. (See page 19.)
■
Virtual real-time recording is possible.
It is possible to virtual real-time record in A18 mode.
(See page 19.)
■
Internal time-date generator.
This VTR includes an internal time-date generator, necessary for
documentation purposes. (See page 13.)
■
On-screen programming.
Menu driven programming simplifies set-up of various functions
including but not limited to the following:
time & date search, timer setting, and alarm recording.
■
Timer recording function.
With timer recording, it is possible to set two programs for each day
of the week as well as one daily program. Up to 15 programs total
are available for timer recording. (See pages 23 - 26.)
■
Tape remaining function.
With this feature, it is possible to check the time remaining until the
end of tape during the recording process as well as playback
process. (See page 4, note
w
and page 18.)
■
Alarm record function.
With a dry contact closure upon the alarm input terminal, it is
possible to set the VTR into alarm mode. When recording in the
alarm mode, the VTR automatically enters into a mode which
usually is a faster recording mode. This is done so that more
information can be recorded.
■
One-shot recording possible.
External trigger input makes it possible to record from 1 to 32 fields
and Manual mode.
■
Alarm memory search function.
This VTR provides an alarm memory function for finding the alarm
event during playback. (See page 41.)
■
Repeat record function.
Repeat record function enables the VTR to automatically rewind
the tape when it reaches the end and restarts the recording
process. (See page 32.)
RESTART RECORDING .......................................................................... 22
TIMER RECORDING ................................................................................ 23
ALARM RECORDING .............................................................................. 27
ONE SHOT RECORDING ........................................................................ 30
OPERATION AFTER TAPE END DETECTION ....................................... 32
RECORDING WITH THE SEQUENTIAL SWITCHER ............................. 35
PLAYBACK OPERATION ........................................................................ 37 ~ 41
PLAYBACK ............................................................................................... 37
PLAYBACK IN VARIOUS MODES ........................................................... 39
TIME DATE SEARCH ............................................................................... 40
ALARM SEARCH ..................................................................................... 41
NOTICE .................................................................................................. 42 ~ 48
SIGNAL LEVELS OF INPUT/OUTPUT .................................................... 42
DAILY AND PERIODIC INSPECTION ..................................................... 43
CAUTIONS DURING USE ........................................................................ 45
BEFORE CALLING SERVICE PERSONNEL .......................................... 46
SPECIFICATIONS .................................................................................... 48
TABLE OF CONTENTS
PLEASE READ .................................................................................................. 1
INTRODUCTION ......................................................................................... 2 ~ 8
FEATURES ................................................................................................. 2
TABLE OF CONTENTS .............................................................................. 2
INSTRUCTIONS IN BRIEF ......................................................................... 3
VTR DISPLAY ............................................................................................ 7
WIRED REMOTE CONTROL (Option) ....................................................... 8
PREPARATION ......................................................................................... 9 ~ 20
CONNECTIONS ......................................................................................... 9
CONTENTS OF SCREEN DISPLAY ........................................................ 11
SETTING THE CLOCK ............................................................................. 13
ON-SCREEN FUNCTIONS ...................................................................... 14
DISPLAY SCREEN .................................................................................. 15
COUNTER DISPLAY ................................................................................ 17
SETTING THE RECORDING/PLAYBACK TIME ..................................... 19
LOADING AND UNLOADING A VIDEO CASSETTE ............................... 20
RECORDING OPERATION ..................................................................... 21 ~ 36
RECORDING ............................................................................................ 21