American Dynamics ADR8030X, Инструкция по эксплуатации

Страница: 25 / 52

NOTICE
PLAYBACK
OPERATION
RECORDING
OPERATION
PREPARATION
24
INTRODUCTION
ENGLISH
7
Press the SHIFT
button to blink end time.
Set end time to 17:00
with the SET button and
the
SHIFT button in
the same manner as 6.
9
Press the DISPLAY
button twice to erase the
MENU screen.
10
Press the TIMER button.
8
Press the SHIFT
button and the + SET
button to set recording
time mode to A18H.
REC
H
SP
TIMER
SU2 ON --:-- --:-- 120H
SU1 ON --:-- --:-- 120H
SA2 ON --:-- --:-- 120H
SA1 ON --:-- --:-- 120H
DLY ON 8:30 --:-- 120H
PROGRAM
FR1 ON --:-- --:-- 120H
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120H ➜
➜
➜
➜
➜
➜
➜
17:30:02 A 3
28/8/96 WED
SU2 ON --:-- --:-- 120H
SU1 ON --:-- --:-- 120H
SA2 ON --:-- --:-- 120H
SA1 ON --:-- --:-- 120H
DLY ON 8:30 17:00 120H
PROGRAM
FR1 ON --:-- --:-- 120H
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120H ➜
➜
➜
➜
➜
➜
➜
TIMER
SU2 ON --:-- --:-- 120H
SU1 ON --:-- --:-- 120H
SA2 ON --:-- --:-- 120H
SA1 ON --:-- --:-- 120H
DLY ON 8:30 17:30 120H
PROGRAM
FR1 ON --:-- --:-- 120H
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120H
➜
➜
➜
➜
➜
➜
➜
SU2 ON --:-- --:-- 120H
SU1 ON --:-- --:-- 120H
SA2 ON --:-- --:-- 120H
SA1 ON --:-- --:-- 120H
DLY ON 8:30 17:00 A18H
PROGRAM
FR1 ON --:-- --:-- 120H
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120H ➜
➜
➜
➜
➜
➜
➜
■
The power goes off and the TIMER display lights in the
VTR display.
■
Recording starts at the programmed start time.
Notes:
■
If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.
■
To cancel the timer recording, press the POWER button or
the TIMER button.
■
The time difference between start time and end time
should be more than 1 minute. If they are same, timer
recording doesn’t work.
■
The accuracy of the time display depends on the condi-
tions of use and the environment. Set clock to the exact
time by daily check.
■
During timer power off mode, alarm recording will not
operate at all.
During the 12 hour display, the display appears as follows.
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+ –
ENGLISH
■
Each time the TIME MODE button is pressed, the
display changes as follows.
120H
→
168H
→
L01
→
L02
→
L03
→
A3H
→
A12H
→
A18H
→
A24H
→
48H
→
72H
→
120H
■
Each time the TIME MODE button is pressed, the
display changes in the reverse direction.
SU2 ON -:--- -:--- 120H
SU1 ON -:--- -:--- 120H
SA2 ON -:--- -:--- 120H
SA1 ON -:--- -:--- 120H
DLY ON -:--- -:--- 120H
PROGRAM
FR1 ON -:--- -:--- 120H
MENU=[DISPLAY]
FR2 ON -:--- -:--- 120H ➜
➜
➜
➜
➜
➜
➜
IF A POWER FAILURE SHOULD OCCUR
■
If a power failure occurs, the PW.FAIL display appears
in the VTR display. To erase this display press one of
the operations buttons.
■
If the power failure is recovered within 10 days, and the
battery is charged continuously for more than 48 hours
in the ambient temperature, the date/time data and
timer recording programs remain in the memory.