background image

43

INTRODUCTION

ENGLISH

PREPARATION

RECORDING

OPERATION

PLAYBACK

OPERATION

NOTICE

Order of Daily Checks

1

Turn the power ON for this VTR and for the connected
devices in the surveillance system including the video
camera and monitor TV.

6

Press the PLAY button.

2

Does the correct picture appear in the monitor TV?

3

Is the date-time display correct on the monitor TV?

4

Rewind the tape several digits on the section you
recorded the previous day.

5

Press the 

 or 

 TIME MODE button to go to the

A3-hour mode.

7

Is the playback picture normal?
Is there anything abnormal about the recorded date
and time?

8

Press the REC button.

9

Check the playback picture recorded in A3 hour mode.

1 0

After checking these matters change to the mode you
want to set to.

1

2

3

28/8/96 WED
17:30:06  A3

1

2

3

DAILY AND PERIODIC INSPECTION

This VTR has been designed to stand the use over long periods. Nevertheless, we recommend you to carry out regular daily
inspection to insure problem-free use.

Note:

It is particularly important to carry out daily checks when using the VTR for repeat recording.

REV

FWD

REV

FWD

REV

FWD

TIME MODE

SET

+

REC

H

SP

PLAY

STOP

REC

Содержание ADR8030X





















































Отзывы: