American Dynamics AD615, Руководство оператора

Страница: 50 / 80

On-Screen Text Display Settings 5-7
I M P O R T A N T
Enabling diagnostic tests may cause a momentary loss of communication on
the network when the dome diagnostics are executed.
To enable or disable the running of diagnostic tests, do the following:
1. Select On-Screen Text Display from the Dome Configuration Menu .
2. Use the Tilt control to move the highlight bar to Diagnostic Display .
3. Press Zoom Out or Zoom In to change the setting.
•
If you want diagnostic test to run when the dome resets, select On .
•
If you do not want diagnostic tests to run when the dome resets, select Off . This
choice displays the firmware versions whenever the dome resets.
The default setting is OFF .
4. Do one of the following:
•
If you want to change the status information display, refer to Displaying or
Hiding Status Information on page 5-2.
•
If you want to assign names to the dome, areas, presets, patterns, or alarms, refer
to
Assigning or Changing Name Information on page 5-7.
•
If you want to change the text information appearance, refer to Changing Text
Display Attributes on page 5-10.
•
If you are finished making changes, press and hold Iris Close , then press Focus
Near
or
Focus Far
to save your changes and exit the utility.
4
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to Exit , then press
Focus Far
. The Dome Configuration Menu
appears. Continue with What To Do Next on page 5-12.
Assigning or Changing Name Information
With the Name Configuration Menu displayed, you can highlight a menu item and select
Focus Far
to begin name programming.
Names for each selection can be up to 19 characters long. The following characters are
available:
•
A-Z (upper case )
•
a-z (lower case)
•
0-9
•
Blank Space
•
Minus Sign ( - )
•
Forward Slash ( / )
Setting Names
1. Select On-Screen Text Display from the Dome Configuration Menu .
4
This command is not supported with Manchester.