American Dynamics AD615, Руководство оператора

Страница: 47 / 80

5-4 Operator’s Manual
ALARM NAME
AREA NAME
CAMERA NAME
PATTERN/PRESET NAME
Figure 5-3: Display Locations for Name Information
You may choose to disable displaying all name information, or you may choose to display
selected or all name information.
Changing the Display of All Name Information
1. Select On-Screen Text Display from the Dome Configuration Menu .
2. Use the Tilt control to move the highlight bar to Disable All Names?
3. Press Zoom Out or Zoom In to change the setting.
•
If you want to disable the appearance of all name information, select Yes .
•
If you want all or some name information to appear on the monitor, select
No
.
Then continue with Changing the Display of Selected Name Information on page
5-5.
The default setting is No .
4. Do one of the following:
•
If you want to change the status information display, refer to Displaying or
Hiding Status Information on page 5-2.
•
If you want diagnostic information to appear when the dome resets, refer to
Displaying Diagnostic Tests During Reset on page 5-6.
•
If you want to assign names to the dome, areas, presets, patterns, or alarms, refer
to
Assigning or Changing Name Information on page 5-7.
•
If you want to change the text information appearance, refer to Changing Text
Display Attributes on page 5-10.
•
If you are finished making changes, press and hold
Iris Close
, then press
Focus
Near or Focus Far to save your changes and exit the utility.
2
•
If you want to make changes to other settings, use the
Tilt
control to move the
highlight bar to
Exit
, then press
Focus Far
. The
Dome Configuration Menu
appears. Continue with What To Do Next on page 5-12.
2
This command is not supported with Manchester.