SETUP PROGRAMMING
AD1476
CALL SEQUENCE
The Call Sequence menu permits setting the dwell time for cameras
included in the RUN sequence on the CALL Monitor.
The menu display shows a table of all cameras and associated dwell
times. The information is arranged in columns, with camera numbers
1, 3, 5, and 7 in the first column, associated dwell times in the second
column, camera numbers 2, 4, 6, and 8 in the third column and those
associated dwell times in the far right column.
To Change a Dwell Time Entry:
1. Move the cursor to the camera number dwell time entry to be
changed using the Left, Up, Down, or Right arrow pushbuttons.
2. Use the + or - buttons to set the dwell time. This dwell time is
used for the corresponding Video Inputs for the RUN sequence on
the CALL Monitor.
•
I thru 99: Adds the Video Input to the RUN sequence,
with the corresponding dwell time in seconds.
•
0: Skips the Video Input in the sequence.
Include Quad:
Adds or deletes the Quad Display from the RUN
sequence on the CALL Monitor output. Using the arrow pushbuttons,
position the cursor at the INCLUDE QUAD entry. Use the + or -
pushbuttons to change the entry to include or exclude the Quad
Display in the sequence.
rote: The Quad Display included in the RUN sequence is identical to
the Quad Display presently selected for the QUAD Monitor output
(next menu).
When all entries are displayed as desired, press NEXT to store the
entries and advance to the QUAD DISPLAY menu.
QUAD DISPLAY
The Quad Display menu lets you select the desire( configuration of
the QUAD Monitor display.
Figure 18 - Quad Display Menu
Mode
- Selects the QUAD Monitor display mode as follows:
• A ONLY: Selects Quad A only.
• B ONLY: Selects Quad B only.
• A AND B: Sequences Quad A and Quad B displays
(DuoQuad Mode) for the selected dwell time.
• MANUAL: Allows the operator to manually select Quad A or
Quad B, or to automatically sequence Quad A and Quad B
(DuoQuad Mode) by using the Quad A/B pushbutton on the front
panel (see page 6). Quad A is selected when the button is pushed
once and Quad B is selected when pushed twice quickly. The
DuoQuad Mode is selected when the pushbutton is held for two
seconds.
Using the arrow pushbuttons, position the cursor at the MODE entry,
and use the + and - pushbuttons to increment or decrement the entry to
the desired display mode.
Dwell
- Sets the dwell time of the Quad Display sequence. This dwell
time applies to the DuoQuad Mode sequence on the QUAD Monitor
output, and to the dwell time of the Quad Display if it is included in
the RUN sequence (prior menu).
Using the arrow pushbuttons, position the cursor at the dwell number.
Use the + or - pushbuttons to increment or decrement the number.
Dwell times for this menu are between 1 and 99 seconds. A dwell time
of 0 is not available.
When all entries are displayed as desired, press NEXT to store the
displayed entries and advance to the TITLES menu.
