American Dryer Corp. ML-55 Phase 7, Руководство по установке

Страница: 3 / 26

Table of Contents __________
Safety Precautions ....................................... 2
Specifications/Component Identification ..... 3
Specifications ...................................................................... 3
Component Identification .................................................... 4
Installation Procedures ................................ 4
Location Requirements ...................................................... 4
Unpacking/Setting Up ......................................................... 5
Dryer Enclosure Requirements ......................................... 5
Fresh Air Supply Requirements ......................................... 6
Exhaust Requirements ....................................................... 6
Electrical Information .......................................................... 8
Gas Information ................................................................. 11
Steam Information ............................................................. 12
Preparation For Operation/Start-Up .................................. 15
Preoperational Tests ........................................................ 15
Preoperational Instructions .............................................. 16
Shutdown Instructions ...................................................... 16
Service/Parts Information .......................... 17
Service ...............................................................................17
Parts ...................................................................................17
Warranty Information ................................. 17
Returning Warranty Card ..................................................17
Warranty .............................................................................17
Returning Warranty Parts ..................................................17
Routine Maintenance ................................. 18
Cleaning ............................................................................18
Adjustments ...................................................................... 18
Lubrication ......................................................................... 18
Procedure for Functional Check of
Replacement Components ......................... 19
Data Label Information............................... 20
Manual Reset Burner Hi-Limit Instructions 20
Phase 7 .............................................................................20
Dual Timer ......................................................................... 20
Fire Suppression System (F.S.S.) ................ 21
Important
You must disconnect and lock out the electric
supply and the gas supply or the steam supply
before any covers or guards are removed from
the machine to allow access for cleaning,
adjusting, installation, or testing of any
equipment per OSHA (Occupational Safety and
Health Administration) standards.
Please observe all safety precautions displayed
on the equipment and/or specified in the
installation manual included with the dryer.
Dryer must be installed in a location/
environment, which the ambient temperature
remains between 40° F (4.44° C) and 130° F
(54.44° C).
“Caution: Label all wires prior to disconnection
when servicing controls. Wiring errors can cause
improper operation.”
«Attention: Au moment de l’entretien des
commandes, étiquetez tous les fils avant de les
débrancher. Des erreurs de câblage peuvent
entraîner un fonctionnement inadéquat et
dangereux.»
Caution
Dryers should never be left unattended while in
operation.
Warning
Children should not be allowed to play on or near
the dryer(s).
Children should be supervised if near dryers in
operation.
Under no circumstances should the dryer door
switch, lint drawer switch, or the heat safety circuit
ever be disabled.
The dryer must never be operated with any of
the back guards, outer tops, or service panels
removed. Personal injury or fire could result.
Dryer must never be operated without the lint
filter/screen in place, even if an external lint
collection system is used.
For Your Safety
Do not dry mop heads in the dryer.
Do not use dryer in the presence of dry cleaning
fumes.
Dryer must not be installed or stored in an area
where it will be exposed to water or weather.
The wiring diagram for the dryer is located in the
front electrical control box area.