American Dryer Corp. AD-50V Скачать руководство пользователя страница 45

Страница: 45 / 64

e. Specify whether the part(s) being returned is for a replacement, a credit, or a refund.

NOTE

: If a part is marked for a credit or a refund, the invoice number covering the purchase of the

replacement part

must be

provided.

NOTE

: Warranty tags

(ADC

Part No. 450064) are available at "no charge" from

ADC

upon request.

3. The company returning the part(s) must clearly note the complete company name and address on the out-

side of the package.

ALL

returns

must be

properly packaged to insure that they are not damaged in transit.

Damage claims are

the responsibility of the shipper.

IMPORTANT

: No replacements, credits or refunds will be issued for merchandise damaged in transit.

ALL

returns

should be

shipped to the

ADC

factory in such a manner that they are insured and a proof of

delivery can be obtained by the sender.

Shipping charges are not the responsibility of ADC. ALL returns should be "prepaid" to the
factory. Any

"C.O.D." or "COLLECT"

returns will not be accepted.

IMPORTANT

: No replacements, credits, or refunds will be issued if the claim

cannot

be processed

due to insufficient information. The party filing the claim will be notified in writing,
either by "FAX" or "CERTIFIED MAIL - Return Receipt Requested," as to the
information necessary to process claim. If a reply is not received by the

ADC

Warranty Department within thirty (30) days from the FAX/letter date, then no
replacement, credit, or refund will be issued, and the merchandise

will be discarded

Содержание AD-50V

































































Результаты поиска

Содержание AD-50V

Отзывы:

Похожие инструкции для AD-50V

Бренды по названию

Популярные бренды

American Dryer Corp. AD-50V, Инструкция по установке и эксплуатации

Результаты поиска

Содержание AD-50V

Отзывы:

Похожие инструкции для AD-50V

Бренды по названию

Популярные бренды