American Dryer Corp. AD-202 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 62

American Dryer Corp. AD-202 Скачать руководство пользователя страница 8

4

American Dryer Corp.

113289 - 6

WARNING:

Disconnect power before resetting the hi-limit. The hi-limit is located on the left side of
the burner box, looking at the burner from the back of the dryer. Press and release and
the hi-limit will reset.

CE ONLY

IMPORTANT:

This appliance must only be installed and operated in the country of destination
indicated on the dryer’s data plate. If the appliance is to be installed and operated in a
country other than the one indicated on the data plate, a data plate amendment must
be obtained from American Dryer Corporation.

IEC335 applies.

NOTES ______________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

«
...
6
7
8
9
10
...
»

Содержание AD-202































































Отзывы:

Нет отзывов