background image

Please Note:

 Specifications and improvements in the design 

of this unit and this manual are subject to change without any 
prior written notice.

 Revo XPress  

 

   

                     Specifications

Model:    

 

Revo XPress

Voltage:

 

 

 

100V~240V 60Hz/50Hz

LEDs:

   

 

 

256 LEDs (64 Red, 64 Green, 

 

 

 

 

64 Blue, and 64 White)

Power Consumption: 

26W

Beam Angle:   

 

60 Degrees

Fuse:

   

 

 

7A

Power Cord Daisy Chain: 

20 Fixtures Max.

Dimensions: 

 

 

38.5”(L) x 8.5”(W) x 4.75”(H)

 

 

 

 

975mm x 121mm x 213mm

Weight:

 

 

 

9.5 Lbs. / 6.4 kgs.

Colors:

 

 

 

RGB + White

Duty Cycle:

   

 

None

DMX: 

 

 

 

4 or 256 DMX Channels

Sound Active:

 

 

Yes

Working  Position:

   

Any Safe, Secure Position

Warranty:

 

 

 

3 Year (1095 days)

©American DJ Supply

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandjeurope.com

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

American DJ

®

  -  www.americandj.com  - Revo XPress Instruction Manual Page 19

Auto Sensing Voltage:

 This fixture contains a electronic bal-

last, which will auto sense the voltage when it is plugged into the 
power source.

Содержание Revo XPress











Отзывы: