American DJ
®
- www.americandj.com - Revo XPress Instruction Manual Page 13
American DJ
®
- www.americandj.com - Revo XPress Instruction Manual Page 14
Revo XPress
Operation
trol different functions including blackout.
Sound Active Mode:
This mode allows a single unit or several units
linked together, to run to the beat of the music.
1. Tap the MENU button until
“
SOUN
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons until “ON” is displayed and press
ENTER.
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Show Mode:
This mode allows a single unit or several units linked
together, to run
1 of 12 light shows
. For Show Mode to run properly,
make sure Sound Active mode is off.
1. Tap the MENU button until
“
SHND
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons until you find your desired show,
and press ENTER.
3. Select your desired program speed and press ENTER.
4. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Revo XPress
Power Cord Daisy Chain
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 20 fixtures maximum. After 20 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Revo XPress
4 Channel Mode
Channel Value
Function
1 PROGRAMMED SHOWS
0 - 9 OFF
10 - 85 SYNC LIGHT SHOW
86 - 160 2-LIGHT SHOW
161 - 239 4-LIGHT SHOW
240 - 255 SOUND ACTIVE
2 CHASE PROGRAMS
0 - 20 CHASE 1
21 - 43 CHASE 2
44 - 65 CHASE 3
66 - 87 CHASE 4
88 - 108 CHASE 5
109 - 129 CHASE 6
130 - 151 CHASE 7
152 - 172 CHASE 8
173 - 193 CHASE 9
194 - 214 CHASE 10
215 - 235 CHASE 11
236 - 255 CHASE 12
3 PROGRAM/CHASE SPEED
0 - 255 SLOW - FAST
4 STROBE
0 - 9 FULL ON
10 - 255 SLOW - FAST
To operate Channel 2 Chase Programs, Channel 1 must be
between the values of 10-239.