American DJ INNO SPOT LED WIFLY, Инструкция пользователя

Страница: 7 / 14

ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 12 ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 13
BLND -
Blackout or Stand by mode.
1. Press the MENU button until “ BLND ” is displayed, press ENTER.
Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes” is
displayed, press ENTER to confim. The fixture will now be in Blackout
mode. To deactivate Blackout mode, select “No” and press Enter.
I PAN -
Pan Inversion
1. Press the MENU button until “ I PAN ” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons until
I is displayed, press ENTER to confim. To deactivate Pan inversion,
select No and press Enter.
I TLT -
Tilt Inversion
1. Press the MENU button until “ I TLT ” is displayed, press ENTER.
Either NO or 1 will be displayed.
2. To activate the Tilt inversion press the UP or DOWN buttons until
I is displayed, press ENTER to confim. To deactivate Tilt inversion,
select No and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “ LED ” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to keep the LED display on at all
times, or “ OFF ” to switch to have the LED display switch off after 10
seconds.
3. Press ENTER to confirm. To make you LED display reappear again
press any button.
Inno Spot LED WiFly System Menu
ENTER. Either “ SH 1 ”, “ SH 2 ”, “ SH 3 ” or “ SH 4 ” will be displayed.
2. Press the UP or DOWN buttons to find you desired show and then
press ENTER to confim and exit.
SHOWS:
Show 1 - For fixtures placed on the floor, the tilt movement angle is
210°
Show 2 - For fixtures fixed to the ceiling or truss, the tilt movement
angle is 90°.
Show 3 - For fixtures placed on a table or stage. The beam is pro-
jected at the audience’s direction; i.e. in front of the stage. Pan move-
ment angle (left to right to left) is 160°. Tilt movement angle is 90°.
Show 4 - For fixtures fixed to the ceiling or truss. The beam is pro-
jected at the audience’s direction; i.e. in front of the stage. Pan move-
ment angle (left to right to left) is 160°. Tilt movement angle is 90°.
SLND -
This will let you set the unit as a slave in a
master/slave configuration.
1. Press the MENU button until “ SLND ” is displayed, press ENTER.
Either “ SL 1 ” or “ SL 2 ” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture to
Master and then set the next fixture to “ SL 2 ”, the fixtures will now
have contrast movement to each other.
SOUN -
Sound Active mode.
1. Press the MENU button until “ SOUN ” is displayed, press ENTER.
2. The display will show either “ ON” or “OFF ”. Press the UP or
DOWN buttons to select “ ON ” to activate sound active mode, or
“ OFF ” to deactivate sound active mode.
3. Press ENTER to confirm.
Inno Spot LED WiFly System Menu