ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 10
ADJ Products, LLC - www.adj.com - Inno Spot LED WiFly Instruction Manual Page 11
Inno Spot LED WiFly
System Menu
System Menu: When making adjustments you can press
ENTER to confirm your setup then press and hold the
MENU button for at least 3 seconds to lock it in, or you can
wait 8 seconds for automatic setup. To exit without making
any adjustments press the MENU button.
ADDR -
DMX Address Setting
.
1. Press the either the MENU, UP, or DOWN buttons until “
ADDR
” is
displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the
UP or DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
ULEN
-
This activate WiFly mode and deactivate it.
1. Press the MENU button until “
ULEN
” is displayed, press
ENTER.
2. Either “Off” or “On” will be displayed. Select “On” to activate
and “Off” to deactivate.
ULCH
-
This will let you select and set your WiFly
address.
1. Press the MENU button until “
ULCH
” is displayed, press
ENTER.
2. “
X
” will now be displayed, “X” representing a number between
0-15. Press the UP or DOWN buttons to find your WiFly address.
3. When you have found your desired WiFly address press
ENTER to confirm and exit.
SHND -
This will let you choose one of the four prepro-
grammed shows. See show descriptions below.
1. Press the either the MENU button until “
SHND
” is displayed, press
Inno Spot LED WiFly
System Menu
DMX 512 Address Setting
Wifly Enable
Wifly Channel
Show Mode
Slave Mode
Sound Mode
Blackout Mode
Pan Inversion
Tilt Inversion
Led Display
Display Inversion
Focus Adjust
Selt-Test
Temperature Test
Fixture Hours
Software Version
Reset
