background image

ADJ Products, LLC  -  www.adj.com  - Inno Spot LED WiFly Instruction Manual Page 22

ADJ Products, LLC  -  www.adj.com  - Inno Spot LED WiFly Instruction Manual Page 23

 Inno Spot LED WiFly 

                              Gobo Replacement

This unit comes with interchangable gobos. When changing 

the gobos please be very careful. Follow the instructions below, 

and see the figure pictures on the next page.

Caution!

 Never open the unit when in use. Always disconnect 

the main power before attempting to change the gobos.
1. To change the gobo, you must remove the top half of the       

    moving head. The top half of the moving head does not        

    have the lens attached to it. 
2. Unscrew the 4 phillips screws that secure the top half of the 

    head. Remove the top half of the head.
3. When you remove the shell you will be able to access the      

    gobo wheel (see picture below). Rotate the head so that the  

    lens is aimed up. Turn the gobo wheel with your hand until 

    you find the gobo you would like to change.
4. Using a pair of needle nose pliers, grab the fixture ring that  

    holds the gobo in place and remove the ring.
5. Once the ring is removed, rotate the head upside down so  

    that the gobo falls into your hand. 

  

6. Carefully insert your new gobo and insert the fixture ring. 
7. Reassemble the unit.

 Inno Spot LED WiFly 

 

 

                DMX Traits

  

Channel      Value 

 

         Function

         6                                                   SHUTTER/STROBE

                            0 - 7                                 BLACKOUT

                            8 - 15                           SHUTTER OPEN

                          16 - 131                  STROBING SLOW - FAST

                        132 - 139                         SHUTTER OPEN

                        140 - 181               FAST CLOSE - SLOW OPEN

                        182 - 189                         SHUTTER OPEN

                        190 - 231               FAST OPEN - SLOW CLOSE

                        232 - 239                         SHUTTER OPEN

                        240 - 247                       RANDOM STROBE

                        248 - 255                         SHUTTER OPEN

         7                 0 - 255                      DIMMER 0% - 100%

         8                                           MOVING HEAD MOVEMENT

                            0 - 7                             NO FUNCTION

                            8 - 28                            MOVEMENT 1

                          29 - 49                            MOVEMENT 2

                          50 - 70                            MOVEMENT 3

                          71 - 91                            MOVEMENT 4

                          92 - 112                          MOVEMENT 5

                        113 - 133                          MOVEMENT 6

                        134 - 154                          MOVEMENT 7

                        155 - 175                          MOVEMENT 8

                        176 - 196                          MOVEMENT 9

                        197 - 217                          MOVEMENT 10

                        218 - 238                          MOVEMENT 11

                        239 - 255                          MOVEMENT 12 

         9                 0 - 255          MOVEMENT SPEED FAST - SLOW          

        10                                                     PRISM EFFECT 

                            0 - 6                                NO EFFECT

                            7 - 255                         PRISM EFFECT

Содержание INNO SPOT LED WIFLY















Отзывы: