2. Operation Guide
2.3.4 Delete a Chase
2.3.5 Delete all Chases
1. Select the chase you wish to delete.
2. Press and hold down the Auto/Del button.
Tap the Chase button while holding down the
Auto/Del button, all LEDs will flash three times
briefly indicating this chase has been deleted.
1. With the power off, press and hold down the Auto/Del
and Bank Down buttons at the same time.
2. Apply the power again.
21
Chase Button 1-6
TAP/Display
FINE
MODE
ASSIGN
REVERSE
Chase
Auto/Del
Auto/Del
BANK
2. Operation Guide
2.4 Assign/Reverse DMX channel
2.4.1 Assign DMX channel
1. Program enable.
2. Press the Fine and Mode buttons at a time,
the Assign LED lights up indicating Assign mode
is active.
3. Use Bank Up/Down button to change between
the Pan and Tilt, the corresponding LED lights
indicating this selection.
4. Tap the Tap/Display button to change between
8 CH. and 16 CH. mode, the LCD reads
22
ASSXX XX
ASSXX XX
X/Y
X/Y
08CH
16CH
or
BANK