GENERAL FUNCTIONS AND CONTROLS CD PLAYER
A. PLAYER CONTROLS (FIGURE 3)
1. EJECT BUTTON -
Pressing this will open/close the CD tray. The eject function can only happen when the
unit is in pause or cue mode, this is to prevent accidentally ejecting the disc when in play mode.
2. FOLDER BUTTON -
This button is used to toggle between folders and tracks. Press this button to show
the folder that is playing in the LCD. Pressing and holding this button for at least 3 secs. will activate
REPEAT mode.
3. TIME BUTTON -
The TIME button will switch the time value described in the TIME METER (50) between
ELAPSED PLAYING TIME, TRACK REMAINING TIME, and TOTAL REMAINING TIME (this is for CDs only).
4. SGL/CTN -
This function allows you to choose between single track play or continuous track play (all tracks
in order). This function also operates in RELAY mode, when RELAY is activated. Pressing and holding this
button for at least 3 secs. will activate AUTO CUE.
5. PITCH SLIDER -
This slider is used to adjust the playback pitch percentage. The slider is a set adjustment
and will remain set until the pitch slider is moved or the pitch function has been turned off. This adjustment can
be made with or without a disc in the drive. The pitch adjustment will remain even if a disc has been removed
and will reflect on any other disc loaded into the player. That is to say, if you set a +2% pitch on one disc,
remove that disc and insert another, that disc too will have a +2% pitch. The amount of pitch being applied
will be displayed in the LCD (20).
6. PITCH ON/OFF BUTTON
- This button is used to switch the pitch function on and off. When the button
LED is lit the PITCH SLIDER (5) is active. When the button LED is not lit, the PITCH SLIDER (5) is not active.
The pitch percentage can be changed between 4%, 8%, 16%, 100%. 4% pitch percentage can be changed
©
American Audio
®
- www.AmericanAudio.us - Encore 2000 Instruction Manual Page 9
Figure 3
1
2
13
4
9
8 7
6
5
12
18
17
15
14
19
3
10
11
16
20
