American Audio Encore 2000 страница 6 Скачать руководство пользователя

Страница: 6 / 37

Introduction:

Congratulations and thank you for purchasing the American Audio

Encore 2000 System. This system

is a representation of American Audio’s continuing commitment to produce the best and highest qual-

ity audio products possible at an affordable price. Please read and understand this manual completely

before attempting to operate your new system. This booklet contains important information concern-

ing the proper and safe operation of your new system.
Customer Support:

American Audio

provides a toll free customer support line, to provide set up help and answer any

question should you encounter problems during your initial set up or operation. You may also visit us

on the web at www.AmericanAudio.us for any comments or suggestions. Service Hours are Monday

through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.

Voice:

(800) 322-6337

Fax:

(323) 582-2941

E-mail:

[email protected]

To purchase parts online visit http://parts.americandj.com
Caution! There are no user serviceable parts inside this audio system. Do not attempt any repairs

yourself, without being instructed to do so by an authorized American Audio service technician. Doing

so will void your manufactures warranty. In the unlikely event your audio system may require service,

please contact American Audio

customer support.

Do not discard the packing carton in the trash. Please recycle when ever possible.

INTRODUCTION

UNPACKING

Every Encore 2000 System has been thoroughly tested and has been shipped in perfect operating

condition. Carefully check the shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your system for any damage and be sure all

equipment necessary to operate the system has arrived intact. In the event damage has been found or

parts are missing, please contact our toll free customer support number for further instructions. Please

do not return the system to your dealer without first contacting customer support.

Please be sure to make any connections before plugging the system in to an electrical outlet. All

fader and volume controls should be set to zero or minimum position, before the system is switched

on. If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch on the system immediately. The arising condensation of water might damage your device.

Leave the device switched off until it has reached room temperature.
Operating Determinations:

• When installing this system, please make sure that the device is not exposed or will not be

exposed to extreme heat, moisture or dust!

• Do not operate the system in extremely hot (more than 30°/86°F) or extremely cold (less than

5°C/40°F) surroundings.

• Keep the unit out of direct sunlight and away from heaters.

• Operate the system only after becoming familiar with its' functions. Do not permit operation by

persons not qualified for operating the unit. Most damages are the result of unprofessional opera-

tion.

SET-UP PRECAUTIONS

American Audio

- www.AmericanAudio.us - Encore 2000 Instruction Manual Page 6

Содержание Encore 2000






































Результаты поиска

Содержание Encore 2000

Отзывы:

Похожие инструкции для Encore 2000

Бренды по названию

Популярные бренды

American Audio Encore 2000, Руководство пользователя и справочное руководство

Результаты поиска

Содержание Encore 2000

Отзывы:

Похожие инструкции для Encore 2000

Бренды по названию

Популярные бренды