©American Audio® - www.americanaudio.eu
ELX Series
User Manual Page 14
6.
R
EAR
P
ANEL
(8) Channels A & B Speakon Outputs
– Optional speaker output connections.
Use pins 1+ and 1- of this 4-pole Speakon connector to connect to your speakers’ Speakon input jack.
(9) Channel A & B Output Jack/5 way Binding Post
– Connect to your speakers’ input jack.
Red
is positive signal and
Black
is negative signal. When using Bridge Mode, use Channels A & B.
(10) AC Cord
– Plug this cable into a standard wall outlet. Check that the voltage in your area matches the amplifiers required voltage.
Fuse Holder
– This housing stores a 12 amp protective fuse. Never defeat the fuse, the fuse is designed to protect the electronics in the
event of severe power fluctuations. Always be sure to replace the fuse with an exact match as the one being replaced, unless otherwise told
to do so by an authorized American Audio® service technician.