©American Audio® - www.americanaudio.eu
ELX Series
User Manual Page 12
5.
F
RONT
P
ANEL
ELX
S
ERIES
(1) Indicator LEDs
Channel Protect Indicator
– The yellow Protect LED will begin to glow when the channel goes into
Protect Mode
. When the channel goes into
Protect Mode
, all output for that channel will turn off. This is to protect any speakers connected to the channel.
Channel Clip Indicator
– This red LED will begin to flash when channel one begins to overload (clip). At this point channel one will begin to
distort. Under heavy clipping activity lower the channel one gain control to reduce the risk of damage to your speakers and amplifier. This
LED may glow when the unit has been turned off, this is normal.
Channel Signal Indicators
– These green LEDs will glow according to the average signal output.
Active Indicators
– These green LEDs will glow when the amp is switched on.
